Top
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12
USB camera C1 MICRO M12

USB camera C1 MICRO M12

€ 123,00
Model
CAMERA_C1_MICRO_M12
Country of origin
Germany
Silicone dust cap
No dust cap(€ 0,00)
With dust cap(€ 19,50)
USB Cable
Have questions?

C1 family camera C1 MICRO M12 with AR0330 sensor offers h.264/MHPEG/YUYV compressions over USB interface. Hardware architecture is the same as C1 original, but dimensions are much more suitable for weight and dimension critical applications.

Features:

  • Aluminum case
  • M12 lens mount (Also known as S-mount)
  • Format: 1/3-inch (5.8mm)
  • Sensor: Onsemi AR0330
  • Imaging area: 2304H x 1536V (5.07mm x 3.38mm)
  • Sensor pixel size: 2.2μm x 2.2μm
  • Sensor dynamic range: 72.4db
  • Sensor sensitivity: 1.9 V/lux-sec (550nm)
  • YUY2/MJPEG/h.264 compression
  • 1920x1080 @ 30fps
  • UVC compatible
  • USB 2.0
  • Non cropped sensor operation in all resolutions
  • Each camera has unique serial number
  • Two versions for different lenses:
    14.7mm for telephoto lenses (total weight without a lens 12.2g)
    9.5mm for most regular and short back focus lenses (total weight without a lens 11.4g)


Documentation:

  • Documentation on wiki
  • 3D model can be downloaded from GitHub


Notes:

  • Camera has no built in filter, therefore is sensitive to IR and visible light. Select lens with caution!
  • Lens not included!
  • 1.5m length 1mm pitch USB cable is included
  • Receptacle: Wurth Electronics 665305124022
  • There are two lens mount options available. Please check lens specification before ordering if unsure.
  • Due to limited heat-sink surface area it is recommended to use high conductivity mount parts
  • Online lens view angle calculator

Attributes

Country of origin
Germany
Notify me of new products
By clicking the "Subscribe" button, you agree to the Privacy Policy. You will always find a link in the newsletter that you can click to unsubscribe from.

© 2021. All rights reserved.

Solution: e-bros